Coldframe Tips and Articles

You can build a polycarbonate greenhouse on your own if you approach the process of arranging it correctly and competently Do-it-yourself polycarbonate greenhouse is not a myth, but a real reality that anyone can get close to. There are no specific nuances that are available for implementation exclusively to professionals in the construction industry. Of course, you can use their help, but such a service will cost an order of magnitude more expensive. It is better to learn and make a greenhouse yourself.

The fastest way is to build a greenhouse frame with your own hands from wood. It is possible that a wooden greenhouse will be somewhat higher in cost than one made of a metal profile (aluminum or steel), but the environmental friendliness wood  is many times superior to any other building material. The service life of a wooden frame can be up to 20 years if the base for it is made according to all the rules, and the wood itself is periodically treated with antiseptics to protect it from decay and various insects.

The brick foundation for a polycarbonate greenhouse can be made on a concrete strip base or independent from brick alone. In any case, you will need to dig a trench around the perimeter of the greenhouse. The bottom of the trench is cleaned and leveled. We considered the device of a strip foundation made of concrete in a separate article. & nbsp; For a purely brick foundation, the trench will have a smaller depth - cm 20. We have to start with the question of possible limitations.

The construction of a foundation for a greenhouse from a bar begins with digging a shallow trench according to the size of the future greenhouse. First of all, the axes of the greenhouse frame are marked on the ground. For this, a cord and pegs are used, which are driven in at the intersection of the long and short sides of the greenhouse according to the size of each side. Further, stepping back from the axis by 10-20 cm in both directions, the pegs are hammered again, onto which a cord is pulled, limiting the size of the groove in width.

If you are going to acquire a greenhouse on the site, you need to prepare for the fact that you will have to do construction work, such as, for example, building a foundation for a greenhouse. Of course, everyone wants to invest a minimum of effort and money and get the maximum in the form of early vegetables or late autumn ones, when there are frosts and there is nothing in the garden. But this rarely happens.